Thread: Shimming the CVD's
View Single Post
  #3  
Old 09-11-2008
Body Paint's Avatar
Body Paint Body Paint is offline
*SuPeRsTaR mEmBeR*
  
Join Date: Oct 2006
Location: Newport, South Wales
Posts: 2,039
Default
Quote:
Originally Posted by Tom3012 View Post
Hi all...

Just a quick question...

Ive just put the e-speed camberlinks on my car... on the diff nut side the shock wouldnt compress fully as the nut in the diff half seemed to be in the way?

I took the CVD out and moved the shimms around so there's now one behind the wheel spacer and one on the inside, works fine now...

How do other people chim up the CVD's? on the outside (behind the wheel spacer) or on the inside (before you put the CVD through the bearings in the hub)?

Sorry for the probably stupid question

Thanks in advance for your help

Tom
TOM, Have you changed anything else? or have you just put the espeed parts on?

The espeed hangers should not alter the driveshaft plunge that much, if at all.

Have you set the camber correctly after fitting the hangers?
Reply With Quote