Quote:
Originally Posted by Northy
It must put more stress into the gearbox sides....
G
|
How? It takes it away.
Just got in from work and I'm doing maths again already....
M3 = Nominal diameter 3 mm
M4 = Nominal diameter 4 mm
Stress = Force / Area
Therefore stress is inversely proportional to area.
Circumference = pi x d
M3 = 3.14 x 3 = 9.42 mm
M4 = 3.14 x 4 = 12.56 mm
Obviously this is a 33.3% increase in surface area, thus stress around the screw will drop by 33.3% also. So therefore the stress will be reduced on the housing with a bigger bolt.