Quote:
Originally Posted by sim
If I remember correctly, there are the two small ones that mount the spur to the spur holder...
|
Wassat then
Quote:
Originally Posted by sim
...and one of the long ones that come from the bottom of the chassis into one of the servo mounts.
|
Isn't it the short black one that isn't replaced? Then again I could be wrong, I built mine 6 weeks ago and I done forgotted most of it.
For what its worth (and I can't remember if the Screw Kit comes with any) when I first built my Durga I did not replace screws that mount the shocks, as I've found in the past that titanium ones can bend here. I used some good old fashioned M3 deep cap head machine screws from a local tool factors, cost me about 5p for 20, which should see me through to 2028 at least!
When I rebuilt my Durga into a carbon reinforced chassis I removed most of the Tamiya Ti screws as I kept getting the willies that they were going to round out (so that was money well spent. NOT) and replaced them with a set from Tonys Screws. As recommended by Jimmy oOple. Should have done that in the first place, they are ace. Still, we live and learn.