I've had more problems with getting the speedo to remember settings.
I set up the speedo on my computer and then read the settings to make sure the speedo was set correctly. According to the computer the speedo took the setting I wanted ok. I went to my local track for a practice and the car just crawled along as if it had been set to 10% throttle. Luckily I had the quick programing card with me and set the throttle to 80% and it worked ok. A couple of days later at a race meeting I decided to change some settings at the track with the programing card I started a race and within a couple of laps the car was cutting out and then back in again as my previous post. I later tried to reset the speedo with the programing card and it worked ok. This is with the latest Firmware and all other hints provided above. (30 second wait ect.) It seems that it will sometimes take the correct settings and sometimes it won't. (Depends what kind of mood the speedo is in when you try to program it.) I've tried to talk nicely to the speedo but that doesn't work either.
Alex
|