I have for sale this new lipo charger with the following specifications:
Pm me for offers
B6 Li-po Lipo Charger For Lipo/NiMh/Lilon/Life/Nicd/Nimh/pd Battery
Features:
- Specifications:
Operating voltage rang: DC 11.0~18.0 volt
AC to DC adaptor (DC 11.0~18.0V/5A)
Circuit power: Max. charge power 50W
Max. discharge power 5W
Charge current range: 0.1~5.0A
Discharge current range: 0.1~1.0A
Current drain for balancing Li-po: 300mAh/cell
NiCd/NiMH battery cell count: 1~15cell
li-ion/Polymer cell count: 1~6 series
Pb battery voltage: 2V~20V
Weight: 260g (Net Weight)
Dimensions: 117*85*30mm
- Introduction
Thank you for purchasing the B6 Lipro Balance charger. This product is a rapid charger with a high performance microprocessor and specialized operating software. Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. Or please do use this product in company with a specialist!
- NiCd/NiMH
Vultage level:1.2V/cell
Allowable fast charge current:1C-2C (Depends on the performance of cell)
Discharge vultage cut off level: 0.85V/cell (NiCd), 1.0V/cell(NiMH)
- Li-ion
Vultage level:3.6V/cell
Max.charge viltage:4.1V/cell
Allowable fast charge current:1C or less
Min. discharge vultage cut off level: 2.5V/cell or higher
- LiPO
Vultage level:3.7V/cell
Max.charge vultage:4.2V/cell
Allowable fast charge current:1C or less
Discharge vultage cut off level: 3.0V/cell or higher
- LiFe
Vultage level:3.3V/cell
Max.charge vultage:3.6V/cell
Allowable fast charge current:4C or less
Discharge vultage cut off level: 2.0V/cell or higher
- Pb
Vultage level:2.0V/cell
(Lead-acid) Max.charge vultage:2.46V/cell
Allowable fast charge current:0.4C or less
Discharge vultage cut off level: 1.75V/cell or higher