Thread: X11 questions
View Single Post
  #3  
Old 28-10-2008
spenner's Avatar
spenner spenner is offline
Mad Member
 
Join Date: Mar 2006
Location: Northampton
Posts: 1,204
Default

Hi,

First of all i think you have made a wise purchase!!!

Have run my X11 08 3 times and the car is awesome!!!!

Depending on how hard you are on the car, will depend what spares you will need....
But for safety:

Wishbones (These are pretty solid)
Balljoints (Weakest part that i have found, and that was head on collision)
Front bumper
Spring tuning kit
Screws (always lose these)
Spur gears
One way shaft
Diff gears (make sure you run them in and add small amount of lube to gear. Then shim them)
X10 Front rockers

Make sure you loctite everything in....
The current setup we are running is the Kev Lee setup.

Not too many major changes..
35wt in the front Yellow Springs
Extra 57 hole drilled

30wt in the rear Red Spring and compensator spring
Extra 57 hole drilled

Front bumper dremmelled down to allow for better landing clearance.
Rear wing mounted as far forward as possible.

With regard lipo you are better off speaking to Nathan Ralls (Niggs98) as he has tested these.
Im sure there will be a Kev Lee setup on here very soon if not already.
__________________
X Factory UK - Team Corally - DMS Racing - Tuning Haus - Exotek - Avid - Alpha - JConcepts
Reply With Quote