Quote:
Originally Posted by markc
I've checked the fuses on the sides of the charger and they look ok.
|
have you put a dvm across them to make sure?
does it stop altogether or does the discharge display keep counting?
if it's still counting time, mah's etc the discharge fets will more then likely be dead and need replacing
You could also try removing the ROM on the circuit board and refitting it. It's the large one to the left of the keypad and is easily removed. Note the direction it's fitted before removal. Should be a small half moon in the edge that points to the heat sink. After replacement you will need to recalibrate the unit.
calibration info page 10 & 11
starts from were it says
Resetting calibration after memory cleared.
You'll need to do static, charge & discharge calibrtaion.
HTH