Quote:
Originally Posted by Fred79
I run a 4,5 T Lrp/Vortex combo.
Track conditions indoor, carpet high grip and rough asfalt on
the outside track with medium grip.
But i Ran into a problem after finishing the build...
I noticed that the steering rods came in heavy conflict with one of the
the metal blocs that are holding the wisbones.
is this normal?
I followed the build as per the manual and everything was double checked
and I still have the same problem.
|
I take it you're running 5-cell then... Have a look at my carpet wars setup on the link above, it should get you started. One thing i'd change from that now that I know the car a bit better are roll centres, especially the front, I'd put even more shims under the rear suspension blocks. Maybe also try softer springs as this car has really high wheel rates compared to the rest, so whatever springs you ran on your previous car, I suggest you go one rate lower on the Shin (ex, I usually ran tamiya blues outdoors on my TRF, but on this I ran yellows).
As for the steering thing, once you'll have set the droop as per my setup it won't happen. I agree that it shouldn't happen but that's how the car is, all it does really is limit the amout of droop you can run at the front.