Ian, I ran
front
50wt, 2hole piston, middle on tower, outer on wishbone, as long a link as possible on the camber link, and just less than parallel to the wishbone, no roll-bar, hard(ish) springs
Rear
35wt, 2hole piston, in one on the tower, outer on wishbone, long link again, camber link setup as front, no roll-bar, soft(ish) springs
front 5mm, rear 5.5mm very little droop, 2' camber all round, 0' inboard toe on front, 3' toe on the rear.
Got to drive the first lap hard and sliding the car around a little to warm the tyres up, then drive it like you stole it!!
|