Guys, regarding the setting cards! We have found that although Losi tell you to just wait for the ESC LED and the card red LED to come one, this itself is not enough, wait for at least 30 seconds or so after for the programming to "fully" exchange between ESC and Card. We tried to change an ESC to have reverse for a basher and plugged all in, waited for all the LEDs to iluminate but nothing. When we left it 30 seconds it worked.
I have now tried this on several setting changes to see if "time" was all we needed to add and it has now proved to be, since this method has worked on over 10 ESC's.
Try it for yoursleves with somthing simple like turning on reverse (easiest thing to check it has uploaded!) and then just switch it back once you have proved this is your "upload" problem. If you change back to forward only try just quickly try waiting for LED's only and I would bet that it doesnt work, leave it plugged in on the second try for 30 seconds and you should have success.
HTH
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER
AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF
AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI
X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ
TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|