Here we go, I'm using the same strap as you Jimmy. Photos are:
Strap
Trakpower 4900 terminals to front of car - not good
Trakpower 4900 terminals to rear of car - better but not ideal
Rear height
Front height
Slipper assembly clearance (the rubbing on the plate is from the belt, and not from rubbing on the bearing screw)
BTW, how tight should the belts be exactly? I've put one more notch on the front one as the kit recommendation felt a bit too loose. It now has about 3mm deflection in the centre of the top run.
|