Quote:
Originally Posted by DaveG28
next question!
When putting spacers between the gearbox and motor mount plate (on the 2 screws), are you mean't to use 5mm of spacers, 3mm, or 2mm?
Also, do you not grease the idler gears etc, neither b4 instructions or s online guide show it?? If greased, wha grease is good to use?
|
spend plenty of time building the gearbox a very small amount of grease can be used, i used black grease also the spacers i used are bj4 spacers that fit the top deck to the gearbox
