this is what i normally run at batley
rear:
30w oil with number 1 pistons and silver springs
middle hole on shock tower and inner on wishbone
camber link = middle hole on hub and inside on tower
medium wheelbase
2 degree antisquat
front:
40w oil with number 2 pistons and blue springs
middle hole on shock tower and inner on wishbone. if its too aggressive and biting in too much then move shocks to outer on wishbone
camber link = inner on shock tower with no washers underneath and inner on caster block
both washers on caster block at bottom position
30 degree caster blocks
tyres = yellow minipins
hope this helps!
Craig
|