Quote:
Originally Posted by OldTimer
Are you running a diff or one way in the front ? with the one way you will find they are a bit harder on the driveshafts as the drive cups slide out at times, try adding a little foam inside the cup to stop them moving a little.
Also looks like you are using the older style of drive shafts the newer shinny ones are not wasted near to wear the ball/pin. Until the newer type came out i would bend 1 to 2 driveshafts per meeting.
If you are stuck getting the parts, i can sort you out once i get back from the GP.
|
Hi Jonathan, Im running a one way on the front. I now feel quite fortunate. 1 to 2 per meeting! I have only had to straighten them twice in 2 months.
I may just take you up on that offer when you return!
I will also be putting some new foam in there to stop them moving so much too. Thank you for the tip.