[mattym0310]

Here is my final setup from York Regional:

front

springs white (no compreision spring)
oil 25wt losi
piston kit with standard rebound valve
pushrod above rocker
pushrod lenth 33mm
revised front arms - washers in front of wishbone
no roll bar
ride height 19-20 mm
front wing kit with standard lines followed
slight toe in with 1degree of -camber

rear

springs losi blue front
oil 35 AE
piston kit
middle hole on rocker
no roll bar
large rear wing with half guerney
toe in to middle of front wheel
rear upright in upper hole
ride height 21-22mm
Standard anti-squat

I was using worn schumacher yellow minispikes with the outer row cutoff rear and 1 and a half cut off outer front and 1 row cut off the inner front.

Novak 5.5R brushless motor [72 spur, 14/15t pinion]
Nosram Matrix Evo ESC
Associated XP DS1015 servo
EP4200

The track was very high grip on flat grass with some big features.