Well, I'm using whities, have added droop to the rear (as much as possible without driveshafts popping), and using 56 size holes in the pistons with 30wt oil all round and blue front/red rear springs. Basically the car jumps fine and is also ok at single bumps, but is horrible where there is a rough surface and turns. I was running at Bury and if I tried to be at all aggressive it would start to bounce around then fire off into a series of barrel roles. My 501x was less settled in a straight line but way better on bumpy turns.
I want to try and reduce the bump steer as I'm guessing this may be the problem from the above symptoms, but other ideas much appreciated!
|