It squeels only on hard acceleration. TBH after a diff rebuild i replace the screw set with new as iv had numerous probs with them coming loose so i thread lock them, which sometimes makes them a mare to undo lol.
The car is running a 4.5 with the slipper quite tight, so i may back off again sligtly and take it from there.
Thanks
Col.
Quote:
Originally Posted by pugs
hi col, ive always just used a good quality silicone grease on both sides of the washer and had no problems,if the diff is squeeling under acceleration it sounds like the diff is not tight enough or is coming loose after a few runs,I would take the diff apart and check for wear on the internals and maybe even the nut what the diff screw threads into as the nylon part my be worn and the diff screw might be twisting out after a run or two.
|
__________________
TRF 501x - Tamiyafied
Madrat - Bograt
Rc10 FT T4
RC18T
Lunchbox Gold
X-6 squared
Lrp, Novak, Robitronic, Ko Propo, Ezrun , Trakpower ,Team Scream, Demon, Microtech, Dms, Good old Jezza, Je-Spares, Bolton Model Mart,
My Feedback http://www.oople.com/forums/showthread.php?t=25199
|