Quote:
Originally Posted by DCM
you dont take the reading from the top, as that is just the control board and BEC circuitry, all the FET's are on the lower board (R1) and lower 2 boards (R1 Pro). take the temp reading on the solder posts. Also, they have found if you are getting thermalling, running 6 cell and low turn brushless, two caps are needed and possibly a fan, also, have cool air passing over the solder posts, so they effectively remove the heat.
Just to let you guys know, I just took delivery of the RS speedo, exactly the same size as the R1 and the LiPo cells, and lovely they are too!!!
|
I ran the RS last Sunday at the Mid South Regional in Swindon..... worked perfectly without any issue. Very impressed, you won't be dissapointed!