Hello! I've had a serious accident this weekend...
I have used pretty successfully the R1 Pro with 5.5 Nosram and 6cells for 4WD Off Road buggy, even with older S/W versions and it worked fine although the Nosram and Lrp guys are a little bit faster in top speed, but this weekend I tried the speed control on my Xray t1fk05 in combination with an Orion 3.5 and again 6cells. S/W version all new 180! Gear ratio 7.50 for large open track. 1st battery and cut off at 4 mins! No response the car just stopped!
Checking esc temp, around 88 degrees celsious! The capacitor from the extreme heat melted the plastic case of the speedo and now I've got a wavy looking speedo! Thankfully I didn't get any smoke and I really hope the speedo that the speedo will work when I put it back on the buggy.
2nd battery and I have replaced the Tekin capacitor with one from a Nosram speedo which is much bigger and also decreased the brakes at 50% on the speedo and the Transmitter, a little better, but the same shut down at around 4 mins and high temperatures.
Any idea what is wrong with the setup? Timing set at requested from the S/w around 16 if I remember correctly. Unfortunately I did not use a cooling fan, because it was not available at the moment!
Many thanks in advance!
|