Hi all!
I made a small video from our practice today.
The quality on youtube is not that good so itīs a little blurry, but hopefully you see something at least!
http://www.youtube.com/watch?v=aPyE8mRzxmE
I tried a couple of setups today. First i started with a quite soft car and then made the car harder all day. The track is really bumpy so you cant run a super hard car, but the grip is really high so if you run your to soft you will traction roll in every corner. The setup I was using at the end of the day was like this.
Front:
Blue sping
red piston
40 wt oil
Outside on wishbone
Middle hole on tower
Long links
2 mm washer under inner balllink
Rear
Pink spring
blue piston
40 wt oil
Outside on arm
the most inside hole on tower
long links
3 mm washer under inner ballink
long wheelbase
The car was really good, but i need to work more on the rear on the car.
Since I have so thick oil the rear end will bounce some so I will try some diffrent pistons and oils nest time.
And I will also get the RC8 servo horn
Cheers
/Daniel