Quote:
Originally Posted by Hog
You've lost me. I have alloy hubs with 2 holes for top link, 3 holes for wishbone pin, and I run on long wheelbase. Do you mean anti-squat? If so I already use a 1mm washer under the rear (front edge) wishbone mount.
I'm going to adjust to shortest top-link to induce some camber - what do you have in the way of washers under the ballstuds each end?
|
Yep, ment anti squat, try 2m with the hubs on the first hole for your wishbone pin. If your running on polished floor i'd try short wheel base and 3 degree toe in.
Shorten the top link as planned. I have 4m washes on the hub and no washes on the inner.