This is actually my old car, the layshaft oneway will fit directly into the x11 in fact the lack of a layshaft oneway is for me a backward step with the x11.
when i say directly you will need to use an x11 or earlier drive shaft also!!
If you have a look through the old threads on the-pred you will see how i fitted (Wayne78) an hpi pro4 one way, which requires longer drive cups, although now the D4 one way is available you could just drop that in instead.
Mologarain, check that the pushrods are the same length, as i used turnbuckles instead of the fixed length pushrods take them off and lay them side by side.
The rockers are square you don't need a new gear box top, also check your shocks are both the same length, any probs send a pm.
|