[millzy]

wasnt this when they ran xxxs front wishbones? ive looked on line and the only thing i could find was this from the worlds (not this year)


Take a XXX-S rear forward pivot and rear pivot and use that on the car. It will bolt right on. Use the -1 degree antisquat pivot. You will need longer hinge pins. Either traxxas T-Maxx hinge pins work, or you can cut them yourself out off of some old XXX-T MF1 CVD's. Then use the standard XXX arms, with a XX-'cr' rear hubs. I used the 1 degree hubs. You will need to put quite a few shock spacing shims in front of the arm on the hinge pins to shim it properly (the arm should be all the way back to match the stock location). What this does essentially is give you a wider pivot, making the rear end work a little better. This should work better on most tracks, smooth or rough.
Drive Train: Steel dog bones and steel outdrives, tight diff.