Dave,
As a starting point drill your pistons to 57 (black) in the front and 56 (red) in the rear. and run it on 30 wt oil all round with blue springs up front and reds at rear.
you can always go slightly softer later but thats probably a good starting point and is pretty much what i'm running.
I can post my setup here if you are interested but little things are changing all the time at the moment.
If you are using losi pistons, take them out, you'll find very little difference between the different hole sizes because the oil is going round the edge of the piston (they are slighly smaller even if they do look close)
Quote:
Originally Posted by DaveG28
Just done the "dirveway" test before its first run tomorrow, its nice and quiet and a rocket in a straight line!! 
Think maybe I should have followed everyones advice on the shock pistons though, looks very bouncy at the back, will play with springs/oil tomorrow!
Has anyone found out the spring rates on the spring sets yet? Also, found any alternative pistons, bit worried about drilling mine without having spares! |