Quote:
Originally Posted by DoughtyUK.net
Mark, I completely agree about fitting in the B4, I have some of the massive 8000's in my B4.
not sure they fit in am RB5 or XXX though.
I think the OD of a subC cell is 23mm so it makes sense for the size rules to be of similar size to an assembled 6 cell side-by-side pack like most 2WD's run.
I think the LiPo rules should be that any 'complete' battery should comply with those dimensioned, for example, the saddle if placed end to end as you would in a 'stick' 2WD car, should be the same as a single brick LiPo
this would also allow slightly more crazy configs such as 2+2+2 style cells that run in the S4 or 4+2 that run in the X5 to be made up from LiPo cells.
as long as when put 'together' it does not exceed the HxWxL measurements
|
saddle is a strugle to get small as the cell configuration is the problem, could make ur 2 = 2 = 2 but would prob be just 1300mah
saddle in my experience needs a different look at for dimensions