Yeah I had the same problem. Once I turned down the drag brake on the speedo, it was ace. I found it was easiest to set it to one flash to start with (no drag brake and see how it goes). If you like a bit more it is very quick and easy to up to 2 flashes.
The problem I had with my tranny was that I had to adjust the brake end point when I was doing the one touch setup, as it wouldn't recognise full brakes otherwise.
HTH
Mark
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx ::
:: Paint By Turnip Paint ::
|