X11 Set-up Changes
 

Recently got an X11 and I'm just wondering what the main set-up changes people do trackside? Also, what springs do people run front/back and what is the 'pick-up point on rocker' mentioned for the front suspension in the manual's chassis settings at the back?

:) Ta

what track do you run on?

Probably mainly astro, but certainly with a smattering of grass.

this is what I ran at batley [astro with grass] courtesy of Northy :)

Springs: 6t
Pistons: kit + Valve
Oil: 35 Associated
Toe: In 1 Degree
Camber: 2 Degrees
Castor: 0 washer behind wishbone
Ground clearance: 16mm
Anti Roll Bar: None


Rear:

Springs: 5.5t/Gold
Pistons: kit
Oil weights: 50wt Associated
Toe-in per side: 3 Degrees
Camber per side: 2 Degrees
Ground clearance: 22mm - or a little more if it cuts up.
Anti-roll bar: None
Rear lower upright: Upper Hole
Damper pickup point: Middle

Thanks for that.

Maybe some set-ups could be placed in the set-up thread. :thumbsup:

I will do that now! :)

Top banana :thumbsup:

What's the effect of connecting the push rod at the top of the rocker?

How many washers do people fit - I get 9 each side without binding?

http://www.the-pred.co.uk/forum/index.php?topic=20.0

see this thread i think it helps??

Ta. Me thinks a good play is in order.

always happy to help :):cool: