which mini 8ight pivot block bushes to use
 

Hi,

What degree bushings do you guys recommend for use on the alloy pivot blocks on the losi mini 8ight,

Thanks for any info,

Most are using 3 deg rear toe in with between 1.5 and 2 deg anti-squat...However, front end seems to vary, but a general consesus seems to be around maximum caster (fully rear ward angle).

Hope this helps.

Mark

I'd say try 3-4deg toe in on the rear, minimum anti squat and either 10 or 12deg castor on the front :thumbsup:

thanks :)