oOple.com Forums - SV2 issues

oOple.com Forums (http://www.oople.com/forums/index.php)

- Schumacher (http://www.oople.com/forums/forumdisplay.php?f=46)

- - SV2 issues (http://www.oople.com/forums/showthread.php?t=99218)

trr061984

22-04-2012 03:42 PM

SV2 issues

Just got the SV2 built over the last week and a half. Not really got many problems with it but I do have a couple of questions.

First is, how is the lipo going to be held in? The top deck looks ok but after a big crash I can see the lipo coming loose. I suppose I need to velcro the bottom of the lipos as well?

Second, the top deck is a little irritating for getting the lipo in and out off. Do I have to keep unscrewing the four screws every time?

Cheers.

jonathan may

22-04-2012 04:33 PM

i have had no problems with the lipos falling out
i am using body clips to hold the top deck on but you can undo the 2 rear screws and slide the cells out the side

mark christopher

22-04-2012 04:45 PM

Quote:

Originally Posted by trr061984 (Post 646932)

how thick are you lipos?

Swiss

23-04-2012 03:53 PM

I don't put the back screws in. Just put a little foam under the strap as well. Then it just a case of removing the two front screws and pulling the lipo's out.

Paul

trr061984

24-04-2012 12:01 AM

Quote:

Originally Posted by Swiss (Post 647239)

I don't put the back screws in. Just put a little foam under the strap as well. Then it just a case of removing the two front screws and pulling the lipo's out.

Paul

Ok, thanks for the advice. We'll see how we go this week at racing.

trr061984

29-04-2012 03:14 PM

Quote:

Originally Posted by mark christopher (Post 646945)

how thick are you lipos?

About 2cm?

All times are GMT. The time now is 11:05 PM.