losi 22 mid motor setup ?
 

hi i am looking at sorting out a few different setup for a mid motor losi22 on
astro at shrccc

if you could help me and also what tyres work with the setup would be great

many thanks

I ran the following setup on my 22 at the weekend. It was wet all day and the astro is reasonable long pile to, but no sand!!

Front
40W Losi oil
3 hole 1.45mm taper piston
green spring
Shock position middle on arm 2 on tower
2mm limiter fitted
Camber link position 2
2mm under inner ball stud 1mm on outer ball stud
Kick angle 25 degrees - brass
Caster 10 Degrees
Camber -1 deg
Ride height 20mm
Kit Spindle


Rear
32.5w Losi Oil
3 hole 1.55mm taper piston
Yellow spring
Shock position inside on arm 2 on tower
Camber link 2-E with 1mm under both ball studs
4 degree HRC
2.5 Degree anti squat
Short wheel base
Schumacher Cougar Wing
Camber -1
Ride height 20mm
Full rear weight kit - 62 grams
Saddle Lipos with no additional weight

Rear tyres Dboots Multibyte with Mr 'O' Foam Extra wide rear inserts
Schumacher mini spikes - green - Mr 'O' Foam firm insert

LRP x12 6.5
21/76 gearing



I used the same setup as above at Stotfold, on a drying astro track with the following changes

Blue front spring
Pink Rear Spring
50 Gram rear weight
1 degree anti squat
3mm spacer under rear shock tower ball stud

Schumacher Yellow Rear mini spikes and Cut Stagger fronts with standard Mr 'O' Foam inserts.

will try the setup tomorrow thanks for the relpy mate ;)