oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   KYOSHO (http://www.oople.com/forums/forumdisplay.php?f=10)
-   -   Alu Hub Free Play (http://www.oople.com/forums/showthread.php?t=98232)

snowmiu19 10-04-2012 04:23 AM
Alu Hub Free Play
 
Hello guys

Not sure if you all face this problem with the New Gun Metal Alu Hub.

I fit it on to my car and there is a noticable amount of play left and right when i move the outer clamp.

I have shim it with 0.2mm but still there is a big movement.

The hub is supported by a big outer bearing, a inner collar and a stadard bearing.

Regards
Calvin

RudeTony 10-04-2012 06:10 AM
Make sure you have added the crub screw from the inner side to the pin

InsideLineModels 10-04-2012 12:24 PM
Quote:
Originally Posted by snowmiu19 (Post 642254)
Hello guys

Not sure if you all face this problem with the New Gun Metal Alu Hub.

I fit it on to my car and there is a noticable amount of play left and right when i move the outer clamp.

I have shim it with 0.2mm but still there is a big movement.

The hub is supported by a big outer bearing, a inner collar and a stadard bearing.

Regards
Calvin
Is this play still there after you have tightened the wheel up? It may be that the clamp hub isn't fully into position, and tightening the wheel will push it fully home.

Kev

hloland 11-04-2012 08:13 PM
It is the crunch spacer that is to long. You can see the movment on the ballbearing inside the aluhub.

snowmiu19 13-04-2012 05:39 AM
Quote:
Originally Posted by hloland (Post 642944)
It is the crunch spacer that is to long. You can see the movment on the ballbearing inside the aluhub.
Crunch spacer? is that the gold spacer in between the 2 bearings?

Regards
calvin

snowmiu19 13-04-2012 05:40 AM
Quote:
Originally Posted by RudeTony (Post 642260)
Make sure you have added the crub screw from the inner side to the pin
Hello,

i don't get what you mean. Can you show me?

Thanks

Regards
Calvin

hloland 13-04-2012 11:41 AM
Quote:
Originally Posted by snowmiu19 (Post 643503)
Crunch spacer? is that the gold spacer in between the 2 bearings?

Regards
calvin
Yes, part nr LA 253.

Neil Skull 13-04-2012 09:17 PM
Not really sure but it could be you have the wrong size brass bush on the hub.
I dont have the WC kit but i think there are 2 sizes normally one for the front hubs and maybe the back ones are bigger?


All times are GMT. The time now is 01:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com