oOple.com Forums - Schumacher Mi2 EC & Spares

Rolling chassis and spares for sale, £100 ono inc P+P. Complete with a lightly scuffed but unsplit Ansmann prepainted 'shell and RP wheels/tyres. Car comes fitted with a front diff (expensive extra - cost £45) and the original spool is in the box.

Includes original kit box and manual.

Spares are mainly new in packets as follows:

U2759 - Steering mouldings
U2761 - Diff Shims
U3003 - 83T spur
U3005 - 89T spur x 2
U2992 - Rear hub carrier (pair)
U2986 - Foam bumper
U2738 - Steering yoke 6 degree (pair)
U2766 - Carbon fibre rear wishbones (pair)
U2765 - Carbon fibre front wishbones (pair)
H1013 - Red body clips
U1551 - E clips
U3010 - CNC pulley 20T + spacer
U2251 - Kwik Klip (16pcs)
U2858 - Purple alloy spacer set (16pcs)

Unboxed are various servo horns and anti roll bars and the aforementioned front spool as well as a spare rear wing for the Ansmann shell.

Also includes a set of spare outdoor tyres/wheels.

There are also 2 motors, one Fantom 27t stock and one Team Scream 27t stock, both untested as I've never used them but they are not new although they look OK on a casual inspection.

The car has been used outside so there is a little scuffing to the underside of the chassis but nothing serious. Fitted with RPM ball ends all round too.

I bought it to do indoor T/C but as the club is now running indoor buggy heats too it is not getting any use. This will make a wonderful car for a T/C newbie.

Both front driveshafts will eventually require replacement (known weakness with the Mi2/Mi3 unfortunately) but I've run it with a stock Sport Tuned 540 in it and they are standing up well to that - I think the diff is a big help here in reducing the load on the shafts. The spool would probably finish them off inside one race however. This is partly why I have priced the car so low as I know a set of shafts will be £25.

Any questions please ask. If there are no takers it'll end up on the 'bay probably - or I may just end up keeping it. Act now before I change my mind!:)