Centro chassis brace
 

Just seen this and they are doing an undertray too:thumbsup:

http://www.cmldistribution.co.uk/cml...tId=0000006488

You may also need this CLICKY :thumbsup::lol::thumbsup::lol:

Looks like essential tools for the pit box! :lol:

:lol::lol::lol:

Looks similar to the brace I made from a carbon sheet.


http://www.andrewshillito.com/oople/c4.1/c4.14.jpg


After running mine at Robin Hood - with a few decent jumps and crashes - my chassis is still straight :)

These new braces should really have being in the kit all along....

'Like' :thumbsup:

http://www.rc-offroad.be/komet-rc.htm

http://www.rc-offroad.be/images/komet/flattened.jpg
http://www.rc-offroad.be/images/komet/exploded.jpg

These are the apsolute dogs bollocks!
They fit perfect, allign perfect and look perfect!
Well worth £30!

Pity they don't supply longer screws for it at that price - all of the original ones only had a couple of threads sticking through and don't touch the nylock in the nut:thumbdown:

I have a bnip Centro brace on ebay at the moment:thumbsup:

Ha ha yeah ok....

I'd already fitted longer screws for the battery holder nuts so just a straight swap but the two for the brass posts need to be longer yes.

If you've got a dremel dremel some if not fit the screws in the top plate and then fit what you have underneath and you will know if there too log as they will hit the other screw from the top plate!

Hey gaz do you run the brace all the time?is there any positives from running it apart from just the obvious strengthening thanks neil:thumbsup:

I supply all screws, washers,new nuts and even a drill for €30 ;-)

http://www.rc-offroad.be/komet-products.htm

Plus the brace is spacered up, which is super important to make it strong.