HOW TO TELL THE DIFF DEGREE ON REAR ARMS ON B4
 

HI THERE IS THERE A VISUAL WAY TO TELL THE DIFFERENT DEGREE ARMS ON THE B4 I.E. STAMPED ECT.JUST CANT SEE ANYTHING WRITTEN ON THEM??:confused:

Hi,

There is no toe-in on the b4 arms.
(Or all the b4 arms are the same.)

The difference in the B4 arms are the material and how much they flex.

The geometry is the same.

MiCk B. :-)

MUST HAVE SOMETHING WRONG AS IT STATED THAT I CAN GET 20/25/30 DEGREE ARMS

SCRAP THAT IM HAVING A BAD DAY AND TOO MUCH READING.LOL.HEAD SHOT NOW.IM GOING BACK IN TOMORROW.

That would be your font caster angle (achieved via the uprights), not wishbones and that will be on the front of the car and not the rear.

The rear has toe in (via differnt rear hub carriers) usually of 0.5 or 1.0 degree. Depending on what B4 you have (B4 or B4.1), kick up (anti squat) on the mounts of the rears arms also, but as Mick has said, no toe in on the wishbones themselves

Yep,

20/25/30 is the caster at the front.

Darren has listed the options for the rear toe-in.

MiCk B. :-)