oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   KYOSHO (http://www.oople.com/forums/forumdisplay.php?f=10)
-   -   Lipo Sizes (http://www.oople.com/forums/showthread.php?t=96356)

aH0tUnicorn 18-03-2012 11:16 AM

Lipo Sizes
 
Hi,

I need to know what the max height I can have the lipos to fit as my lipos are too big for the lazer zx-5 fs2 and need to buy new ones.

If anyone has some saddle lipos that fit FS just PM.

Thanks

Neil26 18-03-2012 04:18 PM

I think u can put spacers under the battery posts to increase the height or buy the carbon fibre battery plates as I did there quite a bit thinner than the kit plates

aH0tUnicorn 18-03-2012 04:59 PM

Quote:

Originally Posted by Neil26 (Post 633644)
I think u can put spacers under the battery posts to increase the height or buy the carbon fibre battery plates as I did there quite a bit thinner than the kit plates

were can i source these spacers that you put under the battery posts ?

Ill try the carbon fibre battery plates once i give the spacers a try

InsideLineModels 18-03-2012 05:04 PM

Quote:

Originally Posted by aH0tUnicorn (Post 633650)
were can i source these spacers that you put under the battery posts ?

Ill try the carbon fibre battery plates once i give the spacers a try

Most 3mm spacers will do the trick, we have these which are pretty good value.

Clicky

The other option is to go for screw down posts like these

All this is as long as your lipos slot under the top deck?

Kev

aH0tUnicorn 18-03-2012 05:37 PM

Hi,

ive put some shims on the bottom and got a much longer screw and put a lock nut on the end off the screw and then screwed the battery post on top off it so it now is long enough to fit it.


All times are GMT. The time now is 02:37 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com