EOS Race2
 

Is there any setup posted from that race?

From the pictures it looks like they were using black front spring, raised tranny, long front links...

Good job yellow researching FLRacing setups heheh

They where running something like:

black front spring
4x55 37.5 wt
no front limiters (to combat traction roll:confused:)
camber link 1-on spindle
2.5 mm inner ballstud,nothing on the spindle.

red rear spring
4x 55 32.5 wt
ballend 2 turns out
camber link 1-b
1mm - 1mm
1 degree antisquat
raised tranny 1mm
No weights on the rear, only under saddle lipo.

We had to use DBoot tyres on the front and the back, this gave to much front end grip and traction roll.
I think thats the reason for the extreme stiff setup but i am not shure, i drove unfortunatly rear motor and didn't had the stuff with me to convert it to mid, so i couldn't try the setup.

I am going to test this setup with softer springs and damping on a lower bite more bumpy astro track.

Thanks a bunch gigooloo!!!