Hobbywing 35a ESC Help Needed....
 

Guys,

I have just put a new 35a hobbywing esc in my car and now cant work out whats happening!

When I turn the car on it will run on its own until I turn on my transmitter and its the same after a run... I turn the transmitter off and my car creeps away. It does not go flat out when it goes just walking speed.

Any ideas??? :confused:

Thanks in advance.

Make sure you have set up the esc with the transmitter as per instructions, then make sure you always turn on the transmitter 1st then the car, and when finished playing turn the car off 1st then the transmitter!

Instructions above are good, but if you have a 2.4ghz set before setting up the speedo make sure the fail safe position is neutral or slight breaks before calibrating the speedo. That way if you do turn your transmitter off first (not that you should) the fail safe won't be giving the car any gas...

Thanks for the advice guys, will take it on board and see if I can get it sorted.