Brass Weights / Circuit Cars
 

Anyone seen any brass weights about for these cars to help bring them upto weight for the national series?

An under LiPo one would be nice that used the same screw pick up points as per kit ;)

been working on this for a bit, should have one to show you by end of play tomorrow:thumbsup:

Does work quiet well, got one on mine, bit tricky drilling and tapping the three holes though, also keeps the centre of gravity low.

Brass Weighted Lipo Tray to fit V12 etc
 

Just finished machining these first ones. Tray is 6mm thick Delrin will hold 1S lipo upto 93.2mm long and upto 47mm wide. I looked around at the 1S Lipo cells currently available and they all seemed to fit within these dimensions. Brass weight sits underneath and when used with delrin tray have a combined weight of 80.1 grams to bring you back up to legal weight limit. I've been using one similar without the weight for my Nimh cells. As you can see by the pics, this will hold either Nimh or LiPo. Comes with double sided velcro to secure cell or cells in place. If you would like a set machining, please pm me:thumbsup:
£16 plus postage. I've put this post in the for sale section aswell
cheers, paul

http://dl.dropbox.com/u/63644107/lipo1.jpg
http://dl.dropbox.com/u/63644107/lipo2.jpg
http://dl.dropbox.com/u/63644107/lipo3.jpg
http://dl.dropbox.com/u/63644107/lipo4.jpg
http://dl.dropbox.com/u/63644107/lipo5.jpg
http://dl.dropbox.com/u/63644107/lipo6.jpg

neat :thumbsup:

why did you not use the standard three hole mount?

if there was a three hole option I could be inclined to purchase one or two ;)

Give me a couple of days and I'll sort a 3 hole version ;)

Keep an eye on your cell heatshrink, tends to wear through, and with copper underneath it will conduct. Simple solution is check cells heatshrink, and couple of layers of gaffa tape on weight to be sure.

The weight is removed for Nimh cells, that pic is just to show the fit, The weight is used for Lipo cells, but you're right, should check heatshrink reguarly anyway.

Hi

Could you give me the exact size for this please, i just need to know if the holes drilled will fit the standard ce carbon circuit chassis holes, plus the length and width. If it fits i'll take one.

Col

if you want small weights to attach at any points on a chassis, have a look at small round lead fishiing weights, they take a self tapper very well

Hi Col.
the hole centers for the 4 hole version are 71mm x 53mm and the overall dimensions are 110.3mm x 60mm
cheers paul

These look sweet!!!! Nice work. :thumbsup:

hi all brought one of these and brill look so nice too would recomend it saves on having all those lead weight to bring it upto weight

cheers chap and quick postage

I bought one too, brought my ce carbon upto weight limit without the need for multiple sticky weights. Nice bit of kit, quick postage :) i'll put a pic up soon.

Col

same here ill put one up tomorrow when its done

thanx to northmeade keep bits comming

brass weights
 

http://i153.photobucket.com/albums/s...e/P1030611.jpg

http://i153.photobucket.com/albums/s...e/P1030612.jpg

3 Hole Weighted Lipo Cage V2.0
 

http://dl.dropbox.com/u/63644107/lipocage.jpg

Hi All,
After alot of tweaking and testing i have finalised the design for the weighted Lipo cage.
The new V2.0 version fits the 3 hole mardave chassis. It no longer requires M3 lock nuts as M3 screws lock straight into the cage which gives more clearance at the front and back. The cage is 6mm thick and will hold 1S lipo upto 93.2mm long and upto 47mm wide. The brass ballast weight sits underneath and when used with cage have a combined weight of 87 grams (+/- 1 gram due to material variations) to bring you back up to legal weight limit. This will hold either 4 cell Nimh or 1S LiPo. Comes with double sided velcro to secure cell or cells in place.
Due to this version being quicker to manufacture i have dropped the price to £15 plus £2.50 postage and packing First Class Recorded to UK mainland. For postage prices to other destinations please drop me a pm. I will not be making the original 4 hole version any more, only this 3 hole V2.0 version.
If you would like a set machining, please pm me
cheers, paul

Nice job Paul. Waiting on new car before I buy though.

In the meantime what about a tray & weight to suit on half of a saddle pack? Might tempt more into Mardave's without having to buy 12th 1s LiPo.

Sizes here for saddle packs
http://brca.org/sites/default/files/...20v1%20pdf.pdf

from the EB
so max length of a single should be no more than 69.5mm

Mardave Lipo Cages
 

I will not be selling these parts direct any more. Keep your eye on the Mardave website for this and other new exciting products. :thumbsup:
cheers, paul

"Mardave & Northmeade are proud to announce there partnership to produce some great new Innovative designs for Mardave Racing Cars. Over the coming months we will be releasing some exciting products for the Circuit & Oval Racing Market.
Many thanks to Paul for all his hard work and we will be working hard together to bring his ideas to Market."

Chris Wilkinson
Mardave UK

nice one cant wait