DEX210 front tyres - carpet track
 

Never used CUT staggers before, so I've ordered up a set with Medium Inserts, do you run them on full width front wheels, or slim cut down wheels. I run normal staggers on the front without inserts and I cut the wheel down in width, should I do the same for CUT staggers or will they stretch over the wider wheel ?

I ran mine on full width on sat and did the same on the x6

Normal wheels with inserts for the cut staggers mate :)

I use them on slim rims with no insert on carpet.

Use them on the normal wide rim with medium inserts. I thought the normal stagger tyre with no insert was better. The cut stagger gave too much bite at the front, for me at least anyway.

cheers guys for your advice, I'll try them on normal wide rims with schy medium inserts.

:thumbsup:

cut staggers
 

Raymond, i find the cut staggers way too grippy indoors. I would stick with normal staggers.

Dave

I found the cut staggers to have more initial turn in than std stagger but less mid corner grip. This was with foam inserts and on std width front wheel.

I prefer to use minipins on the front and then manage the oversteer. Quicker once you're used to it (at silverstone indoors)