What speedo in a 22
 

Hi guys to be a pain in ass I asked earlier about a servo which i decided to get the savox 1251 but I am a little concerned about space in the 22 so what sped do,s are you 22 guys running and were do u mount the I.e the 2 options behind the motor were losi suggest or behind the servo , if behind the motor can you get a fan on the speedo or does the body get in the way ect or behind the servo can you fit a normal sized receiver there as well look forward to your replies. Regards. Deano

i drive a Orion speedo (r10) and also an orion servo VDS 1009, it's tight but it works ;D

I use a Savox 1251MG Low Profile servo, so it leaves plenty of room, and the Orion R10 Pro.

KO RSX Hc and Nosram Pearl ISTC v2. Can be mounted behind servo in combination KO 409s receiver.

Esc
 

I had a hobbywing jammed in my 22. I recently replaced it with a viper 10r. Amazing unit. Great foot print, as my 22 is mid motor.

Losi 22 has landed
 

Me car has just arrived and tried me original servo which is a full sized Orion & I couldn't even fit a speedpassion v1.1 speedo in it ( the speedpassion is the same size as the latest version ) also me savox 1251 is on its way and me receiver is fitted against the battery stop on its side which takes up 11mm of space but what speedo do I get to fit in the car to run a speedpassion v3 7.5t motor please help I am struggling to work this one out thanks in advance deano

22 speedo
 

Hi I'm running a spektrum low profile servo in my 22 with loads of space, but I have put my speedo on the mounting plate on top of the motor I am running the tekin Rs pro it fits perfect under the shell, plus puts more weight on the rear for more traction. Great setup and excerlent speedo

Yes I very interested in a tekin rs pro too

I'm running an LRP SXX TC V2 ESC in my 22 and it is great! I have the ESC placed behind a low profile 6070 Spektrum Servo and infront of the cells. I have managed to get the receiver and the power caps all in this space too... pretty tight but looks super neat :thumbsup:

Well I got a Nosram pearl without the heatsink and it fits perfect and me receiver too so the car is almost sorted and away I go racing yipee

Here is my 22, with Speed passion Gt2, using a sanwa rx431, savox low pro servo. This lot would have fit in in various positions. Much more room doing the mod and it looks better too;)

http://i1258.photobucket.com/albums/...h/DSCF1703.jpg