oOple.com Forums - help need instructions on how to use a G28 V50

oOple.com Forums (http://www.oople.com/forums/index.php)

- Mardave (http://www.oople.com/forums/forumdisplay.php?f=122)

- - help need instructions on how to use a G28 V50 (http://www.oople.com/forums/showthread.php?t=91174)

iamdigger

21-01-2012 06:04 PM

help need instructions on how to use a G28 V50

How do I setup my throttle boundaries for the G28 v50 esc, I've been looking online for the instructions for 4 hours and have now given up.

Many thanks

Chequered Flag Racing

23-01-2012 09:30 AM

try this

Quote:

OK switch on TX and make sure the throttle is in normal mode, not reverse. Press on button and hold until it flashes green then release. led should now be off. move stick fwd and the led should glow green and increase in intensity.move stick back and it should turn orange then in the second half Red.

Dale Goodchild

23-01-2012 04:54 PM

^^^^ is that not for a viper oval?!?!?!?!

For a G28/V60, turn your transmitter on, put trim to neutral, and power up car, press button on top of esc and thats it. Forward led should be green, reverse (same led) red

Chequered Flag Racing

24-01-2012 07:39 AM

the real deal :thumbsup:

http://i731.photobucket.com/albums/w...tr1/G28001.jpg

All times are GMT. The time now is 08:40 PM.