oOple.com Forums - SOLD Hobbywing XERUN Black 120A 1S

for sale a hobby wing 120 amp s1 speed controller in full working order grab a bargain

Specification

Model: XERUN-120A-1S
Dimension: 43mm(L) x 36mm(W) x 33mm(H)
Cont. / Burst Current: 120A / 760A
Resistance: 0.0003 ohm
Suitable Motor: Sensored and sensorless brushless motors

=>2.5T (1/12 on-road) (Works with 3-4 NiMH or 1S Li-Po)
=>3.5T (1/10 on-road), =>5.5T(1/10 off-road) (Works with 5-6 NiMH or 2S Li-Po),

Battery: 3-6 cells NiMH or 1-2 cells Li-Po
BEC Output: 6V/2A Built-in BEC with step-up DC/DC booster for 1 cell Lipo racing

Cooling Fan Working Voltage:

5V/0.16A, maximum 8.4V (The fan gets the power supply directly from the battery)
Suitable Model: 1/10, 1/12 on-road & off -road car for competition, 1/8, 1/10 rock crawler

Net Weight: 105g

Features

Built-in step-up DC/DC converter (DC/DC booster). Perfectly works with 1-2 Lipo cells, so the single cell class racings such as 1/12 scale competitions are easliy covered by XERUN-120A-1S ESC without an additional receiver battery.

Suitable for 1/10 scale racings by replacing the flat heat sink with the toothed heat sink and cooling fan.

Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP, SpeedPassion, Novak, Etc.

Seamlessly change to sensorless working mode when the sensor cable is broken.

Excellent start-up, acceleration and linearity features.

Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).

User programmable. Easily programmed with the "SET" button on the ESC and also compatible with the Digital LED Program Card and the advanced professional LCD Program Box.

3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode).

4 steps of maximum reverse force adjustment.

Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.

9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".

8 steps of timing adjustment to suitable for all brushless motors.

Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
£55 posted sold