oOple.com Forums - DEX210 Motor Position Changes?

oOple.com Forums (http://www.oople.com/forums/index.php)

- Team Durango (http://www.oople.com/forums/forumdisplay.php?f=80)

- - DEX210 Motor Position Changes? (http://www.oople.com/forums/showthread.php?t=89008)

av4625

28-12-2011 08:05 PM

DEX210 Motor Position Changes?

Is it complecated to change the dex210's motor from mid motor 3 gear to mid motor 4 gear as those are the 2 id b using if i get 1 and was wondering if it is hard to change or is it a quick job?

hotrodchris

28-12-2011 08:20 PM

Back end rebuild not too major as most will do as maintenance after a meeting or two but not something that i would do track side

paulc

28-12-2011 10:35 PM

Swapped mine from mid motor 4 gear to rear motor 4 gear in about 30-45 minutes ish including electrics so if your just adding or taking a gear out probably about a 15 minute job

ASR	28-12-2011 10:59 PM

But you did have loads of weetabix that morning though paul!:lol:

av4625

28-12-2011 11:40 PM

Quote:

Originally Posted by paulc (Post 599893)

Swapped mine from mid motor 4 gear to rear motor 4 gear in about 30-45 minutes ish including electrics so if your just adding or taking a gear out probably about a 15 minute job

but do you not need to turn the whole motor and mechanism around the other way?

paulc

29-12-2011 10:29 AM

Quote:

Originally Posted by av4625 (Post 599923)

but do you not need to turn the whole motor and mechanism around the other way?

No only the motor plate/slipper assembly needs to be swapped from one side to the other but you'll have the gearbox in bits anyway for adding or taking a gear out. Instruction books on the Durango website take alook at that

paulc

29-12-2011 10:30 AM

Quote:

Originally Posted by ASR (Post 599905)

But you did have loads of weetabix that morning though paul!:lol:

LOL...

hottuna

30-12-2011 04:50 PM

7-10 min job from 3RM to 4MM as I have 2 complete gearboxes in these configurations

All times are GMT. The time now is 06:01 PM.