Centro rear hubs..0.5 vs 0 degree
 

As we used and modded the b4.1 alloy 0.5deg rear hubs we now have rear toe in of 3.5 degrees?(think thats right!) But looking at all the finished pics, most are using the 0 degree std hubs. Ran the car at caldicot last friday and(according to my son) it was awesome.
So what effect can we expect by changing to 0 deg or should we stick with 0.5?/
Dave

Try them Dave, and let us know. If 0° hubs increases the awesomeness - then perhaps going to reversed 0.5° hubs will further increase the awesomeness even more?

Id defo try them if I was running on carpet, less toe-in on rear is good. But im running on lower grip sporthall floor where rear toe-in is needed.