x11 indoor setup for twisty track
 

i'm looking for a setup where i could generate more steering on my x1108. anyone got a good setup i can try?

Alan

Hi, I ran my X11 for the first time today at Taplow carpet indoor track.

I ran the high grip set up from the back of the manual and it worked a treet had to cut the outside row of spikes off the outer edge of sch yellow mini pins. But handled really well good balance.

There are a couple of things you can try to gain steering.
1. increasing the front tow out
2. Decreasing the caster angle (this is highly sensitive adjustment, be carefull not to over do this)
3. To gain traction in the front, you can try and reduce the traction on the rear, for example less rear tow in, stiffer rear springs/heavier dumping, install a rear roll bar if you don't have one yet.

Hope this helps

Itsik

hi Alan,

you can try with some weight under the front shock...and the mod for use a short pushrod.
cheers

Max

thanks lads, my car is in the process of a rebuild now but i will take all the info you gave and see what i can do with it in the next indoors after xmas.

cheers..Alan:thumbsup:

ps..so far, i would say the saddle lipo chassis turns better IMOA. you guys?