oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)
-   -   Viper VTX10R - Setups (http://www.oople.com/forums/showthread.php?t=87695)

samd 10-12-2011 07:01 PM

Viper VTX10R - Setups
 
Please post yours! Mainly with boost:)

Darren Boyle 10-12-2011 10:23 PM

What motor and type of set up are you using (off road/on road - 2wd/4wd?)

Timee80 10-12-2011 11:48 PM

i know he runs 4wd offroad with an lrp x12 8.5t octa wind motor

samd 11-12-2011 09:18 PM

Ran today on a small half slippy, half carpet sport hall.

A19

0% drag brake/0% dynamic brake
Brake strength 95%
Brake PWM 8000Hz

No boost/top speed timing (blinky stock mode)
Punch 70%
Forward power 100%
Throttle PWN 9600Hz

LRP octa wind 8.5 as Tim says, geared 8.6/1 in a durango 410

Very happy, smooth and easy to drive, nice brakes with enough power for the small track.

Motor and speedo temps around 130/140degF

Looking forward to trying some boost profiles on larger tracks.

samd 18-12-2011 07:28 PM

Setup for a large track half slippy but not too bad, half carpet sport hall.

A19

0% drag brake/0% dynamic brake
Brake strength 90%
Brake PWM 8000Hz

Start RPM 8000
End RPM 24000
Max acc timing 10deg

Skew rate 5deg/1000rpm
Max top speed timing 5deg
Punch 90%
Forward power 100%
Throttle PWN 9600Hz

LRP octa wind 8.5 , geared 8.6/1 in a durango 410

Again easy to drive, enough top end and power for the long straight, just.

Speedo temps around 140deg
Motor temps around 160deg


All times are GMT. The time now is 10:32 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com