oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Schumacher (http://www.oople.com/forums/forumdisplay.php?f=46)
-   -   Cougar set up (http://www.oople.com/forums/showthread.php?t=87239)

DB01RS 04-12-2011 07:15 PM

Cougar set up
 
What is a good motor/esc and gearing set up for a cougar sv. Running on outdoor AstroTurf using yellow mini spikes?

markwilliamson2001 04-12-2011 07:20 PM

An 8.5 or 7.5 brushless sensored setup is ideal in a 2wd buggy.
Speed passion, LRP, Tekin, Nosram, Novak are all good brands.
Hobbywing sensored is a very close match to the speed passion if your on a budget for a speedo.
Orion motors also popular.

I would estimate about 23 pinion 81 spur or approx.

Hope this helps
Mark

wes j. 04-12-2011 07:57 PM

In my Cougar i use an lrp X12 8.5 with a 24 pinion and 80 spur. I find it gives nice smooth delivery and plenty of top end speed :thumbsup:.

Ritchie T 04-12-2011 08:02 PM

Im running the spur that come with it, 23 pinion, 10 degrees mechanical on an SPV3 7.5.

Small amount of timing on the esc though, wish id just bought a 6.5 and done away with the boost.

:)

bigred5765 04-12-2011 08:05 PM

speed passion gt2 pro
speedpassion v3 7.5
76 tooth spur gear
26-28 tooth pinon

DB01RS 04-12-2011 08:53 PM

Thanks guys! This all helps loads

ian h 04-12-2011 10:32 PM

Quote:

Originally Posted by bigred5765 (Post 590767)
speed passion gt2 pro
speedpassion v3 7.5
76 tooth spur gear
26-28 tooth pinon

What speedo settings are you running with this setup?

bigred5765 04-12-2011 11:29 PM

depends on the track
low grip
punch setting 3-4
timing 7-8

high grip
punch 4-6
timing 5-6

ian h 05-12-2011 12:26 AM

Quote:

Originally Posted by bigred5765 (Post 590911)
depends on the track
low grip
punch setting 3-4
timing 7-8

high grip
punch 4-6
timing 5-6

Which software are you running?

bigred5765 05-12-2011 12:46 PM

from memory think its mod905 or something similar
it the one with the turbo function for mod motors

ian h 05-12-2011 02:12 PM

Quote:

Originally Posted by bigred5765 (Post 591057)
from memory think its mod905 or something similar
it the one with the turbo function for mod motors

Thanks

matdodd 05-12-2011 07:03 PM

This is what Ive run on a V3 7.5 and seams a good starting point in the Cougar I'm not sure how close it is to what Carl runs though

1 -1
2 -2
3 -1
4 -4
5 -3
6 -1
7 -2
8 -1
9 - 6
10 - 1

bigred5765 05-12-2011 07:37 PM

Quote:

Originally Posted by matdodd (Post 591237)
This is what Ive run on a V3 7.5 and seams a good starting point in the Cougar I'm not sure how close it is to what Carl runs though

1 -1
2 -2
3 -1
4 -4
5 -3
6 -1
7 -2
8 -1
9 - 6
10 - 1

mattys runs most of the time
1=1
2=1
3=4
4=3 or 4
5=3
6=1
7=2
8=1
9=5 or 6
10=1
so very similar
turbo settings are of for most indoor tracks, unless large and high grip

TARTMAN 16-12-2011 11:26 PM

hmmmm
 
my cougar has the 81t spur, a 22/23 pinion, 7.5T SP motor, vortex R10 Pro speedo(as from box), not added or changed any setting on the esc, its smooth, fast, easy drive and no turbo unsettling to worry about, had 2 others drive it as is and loved the easy drive and smoothness......

i am old school and not a fan of turbo etc......

YET!

But the grearing and motor T is about right either way, but many seem to have a higher turn(8.5 to 10.5) and add timing and turbo etc..... I prefer lower T and pure grunt...........

just my 2p..............................:thumbsup::D


All times are GMT. The time now is 07:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com