Setups and gearing
 

I have just finished building my ZX5 and was wondering what setup i should use for a large bumpy track, and what gearing should i use for a 9*1 v2.
Thanks
Matt

i use a 17tooth pinion with a fantom v2 9x1 its work quite well please note what cells are using because it makes a huge difference on what you can get away with

I have 3 sets of GP3700 oscars SP2 and 3 packs of sanyo 3600 and a few packs of old GP3300 that i use for pactise. Will the 3600 be alright with the 17t

on good 3700,s you will last fine on a 17. it depends whether the track is open and flowing or tight and twisty. if tight start with a 16 to be on the safe side or perhaps a 16/76 to go halfway inbetween, as for setups there will be a batley setup posted soon so start with that and adjust from there

Thanks
Nathan