Hyper 7 roller, Slash 2WD and Xevo M-03
 

Hi all.

Having a little clearout of the RC's that i dont really use anymore or wont run in the winter.

First up is a hyper 7 roller with the ansmann brushless conversion.

The car is in very good condition and hasnt been run much at all.

The only bad point that i can think off is that it has 2 stripped screws on the diff mounts. Luckily these are on opposite sides so it is still possible to take the diff off.

It comes with a pair of nanda blocks in good condition and 2 which i would class as unusable (although the wheels are fine, the tyres are pretty knackered)

The bodyshell is also vitually brand new under all the tape

If not converted, it would be ideal for spares.

Im looking for £70 posted.


http://i383.photobucket.com/albums/o...5/DSC01933.jpg
http://i383.photobucket.com/albums/o...5/DSC01934.jpg
http://i383.photobucket.com/albums/o...5/DSC01935.jpg



Next is my Slash 2WD.

This has been a very good RC to me and is a very capable basher.

It has full RPM arms, bumpers, nerf bars and hub carriers. (also has a few rpm spares)

It comes with 2 sets of wheels and tyres (the bullseyes shown and the standard ones which arent pictured but are in very good condition)

Also included is a losi 4000kv motor (runs awesome on 2s and will easily make the slash wheelie)

It also has a Xerun 80a and 2 lipos.

1st lipo is a turnigy 3800mah 25c-35c 2s which has had about 4 runs and always balanced.

2nd lipo is a team powers 3600mah 30c 2s which has had around 15 runs and still runs well. This has also always been balanced.

The slash also comes with a generous amount of spares and 2 shells (both have been bashed but are usable)

The only bad points i can think of are:

one side of the rear bodymount has broken off (doesnt really effect much, i used a cabletie for the bodyshell)

One screw holding the rear bumper on has bent and broken the mounting area on the diff casing (again doesnt really effect the running but there is a spare diff casing included anyway)

A highly upgraded slash with spares, ESC, lipos and motor. All you require is transmitter, reciever and charger and a 0.8MOD pinion.

Im looking for £160 posted.

http://i383.photobucket.com/albums/o...5/DSC01936.jpg
http://i383.photobucket.com/albums/o...5/DSC01937.jpg
http://i383.photobucket.com/albums/o...5/DSC01938.jpg



Next is my tamiya xevo m-03 mini.

This is a very rare m-03 conversion which i believe has now been discontinued as a newer version has been brought out.

Basically it puts the motor in front of the front wheels (like a proper mini) and also give you an adjustable wheelbase of either 210mm or 225mm.

The bodyshell has been done in a gulf design. There are a few slight paint faults with the shell and the mount holes have been made pretty poorly, but apart from that, it is a real eye catcher.

This is a very good piece of kit, handles a lot better than the normal M-03 and has more adjustablility.

This is a rolling chassis only, but it does come with another bodyshell, another set of wheels and a large amount of spares.

You will need all the electrics and charger to get this running. (if run it with 210mm wheelbase, the battery has to be mounted lengthways)

I am looking for £60 posted

(the motor in the pictures isnt included, but the blue heatsink is)


http://i383.photobucket.com/albums/o...5/DSC01796.jpg
http://i383.photobucket.com/albums/o...5/DSC01797.jpg
http://i383.photobucket.com/albums/o...5/DSC01799.jpg



Thanks for looking at my thread. If you have any questions, please PM my and i will get back to you ASAP.