Servo Horns..
 

you can use any servo horn, I used a racers edge servo horn, which looks miles better than durangos effort tbh, thats if your a poser like myself :thumbsup:

Not sure about the 410 but the 210 will need a horn of similar size to the standard 1, much longer & it will rub on the steering arms underneath as i found out when i tried my losi 1, the losi 1 is 27mm long & the standard 210 1 is 23mm long, so i would say no longer than 25mm should be fine if fitting a alloy version
My above info relates to it being fitted to a savox 1251mg servo, not sure if other servos are different
HTH

They are different, the 210 one is shorter.

The official TD Alloy servo horn may fit both as it has two positions. An e-mail to TD may clear this up.

http://www.team-durango.com/blog/201...m-servo-horns/

the racers edge horn is short as it has to go under the 410 driveshaft

this beauty

http://www.amainhobbies.com/product_...-Hard-Anodized

ive kept it to stick in the 408 when its out

clearly says its for 8th!!

Thanks for your kind words, I have looked again and can't see that myself. But hence the suggestion of dropping an email to be sure. Maybe you could let me know where abouts the 1/8 th info is on the page linked?

Hi mate, if you go to the page specific to the servo horn then it says at the bottom it is for the 408...

http://www.team-durango.com/part-inf...artNo=TD340064

Thanks, I'd tried the part number links in the blog to try and see that info, but they didn't seem to take me to the part page itself. I can see it quite clearly on that page :thumbsup:

im sorry but how can you justify that price for a servo horn? :confused:

http://www.team-durango.com/part-inf...artNo=TD340023

I bought the racers edge from USA and cost me £8 shipped from USA, and looks miles better quality.

and before the Captainclit bashing begins ask yourself would you really pay that for a servo horn.....

I'll cut the 2nd hole off my losi horn if it's an issue. I'll left the kit horn on for now although I have another losi one in my box.

The aluminum horn for the 22 is a direct fit. I have been useing it on my 210 from day one.